Protein stability: tips and tricks
Proteins can be unstable out of their native environment. They can lose activity as a result of proteolysis, aggregation, and suboptimal storage. Optimal conditions for storage depend on the specific protein, and instructions can be found on the datasheet. Please find some general guidelines below.
General considerations for protein stability
Please find some general guidelines for protein stability below.
Should I lyophilize my protein, or keep it in solution?
Lyophilization allows for more stable long-term storage; however, the protein must be reconstituted before use. There are also specific considerations that need to be taken for handling lyophilized peptides and proteins.
Protein storage in solution is more prone to microbial or proteolytic degradation.
At what temperature should I store my protein?
Storage of protein solutions at room temperature leads to protein degradation and/or inactivity, also commonly as a result of microbial growth.
- For short term storage (a few weeks) it is recommended to keep the protein at 4 ˚C,
- For longer-term storage, we recommened keeping the protein at -20 or -80 ˚C .
Repeated freeze-thaw cycles should be avoided, which can also decrease protein stability.
How should I reconstitute / dissolve my protein?
Concentration considerations
Reconstitution concentration is important for protein stability.
Solutions at concentrations lower than 1 mg/mL are more prone to proteolysis or inactivation because of low-level binding to the storage vessel.
Because it may not be realistic in some cases to have a higher concentration than 1 mg/mL, it is common practice to add “carrier” , such as purified bovine serum albumin (BSA), to 1 to 5 mg/mL (0.1% to 0.5%).
Reconstitution process
Proteins must be dissolved in buffers with great care. Vigorous shaking or stirring (e.g., with a vortex) can destroy biological activity. The use of gloves is necessary in order to prevent contamination from proteases which may degrade the protein sample.
You should also make sure dissolve it in an appropriate buffer: acidic peptides should be stored in a basic buffer, and basic peptides in acidic buffer. If necessary, sonicate briefly.
Peptides containing Trp, Met or Cys require special care to avoid oxidation. Oxygen-free water or reducing agents may be used.
For storage, peptide solutions should be aliquoted and kept frozen at -20°C. Most peptides containing Trp, Met, Cys, Asn or Gln have limited shelf life. Long-term storage is not recommended.
Further agents to promote protein stability
Some of the additives below may help to enhance the shelf life of the proteins. However, the question of whether to add or not should be carefully considered depending upon the experimental need.
For example, high viscosity may compromise sample quality as well as downstream experimental results. While helping to prevent disulfide bond formation, reducing agents also inhibit other redox reactions which may be of interest. Similarly, the inclusion of protease inhibitors for proteins to be used with cell cultures or in living systems would not be advisable.
Cryoprotectants
Adding 25-50% glycerol or ethylene glycol can help to stabilize proteins by preventing the formation of ice crystals at -20 °C, that can destroy protein structure, enabling repeated use from a single stock.
Protease inhibitors
Protease inhibitors interact with the active site of proteases that hamper proteolytic activity detrimental to protein stock stability. Some examples are: PMSF (0.1-1 mM), Pepstatin A (1 μg/mL), Leupeptin (1 μg/mL), etc.
Phosphatase inhibitors
Phosphatase inhibitors inhibit several phosphatases to preserve the phosphorylation state of the proteins.
If you don't add phophatase inhibitors, this can result in reduced or no kinase activity or unexpected protein size.
- Common phosphatases include: acid phosphatases, alkaline phosphatases, serine/threonine phosphatases, protein tyrosine phosphatases.
- Common inhibitors include: sodium fluoride, sodium orthovanadate, sodium pyrophosphate decahydrate, β-glycerophosphate (their concentration must be determined experimentally).
Anti-microbial agents
Adding antimicrobial agents—for example, 1.02-0.05% (w/v) sodium azide (NaN3) or 0.01% (w/v) thimerosal—can help to prevent microbial growth.
Reducing agents
Most proteins contain free thiol groups containing cysteines and oxidation of these free thiols leads to the formation of a disulfide bond between cysteines. The majority of the intracellular proteins require these free thiols for their biological function.
Adding reducing 1-5mM dithiothreitol (DTT), and 2-mercaptoethanol (2-ME, sometimes called ß-ME), can help to maintain proteins in a reduced state by preventing oxidation of cysteines.
Please note that the presence of reducing agents can interfere with certain reactions. So we recommend removing reducing agents if you intend to conjugate the protein. Since reducing agents prevent disulfide bond formation, this is particularly pertinent if you intend to label the protein via a thiol group. In addition, some protein structures are maintained by intramolecular disulfide bonds, which might be broken in a reducing environment.
Chelating agents
Adding chelating agents, like 1-5mM EDTA, groups proteins together, and helps to maintain the reduced state.
Detergents
Adding detergents such as 0.01% Tween-80 help maintain the stability of the hydrophobic protein in aqueous solution. This also reduces the probability of proteins binding to the storage tube.
출처: https://www.abcam.com/help/protein-stability-tips-and-tricks
Protein stability: tips and tricks
Proteins can be unstable out of their native environment. They can lose activity as a result of proteolysis, aggregation, and suboptimal storage. Optimal conditions for storage depend on the specific protein, and instructions can be found on the datasheet. Please find some general guidelines below.
General considerations for protein stability
Please find some general guidelines for protein stability below.
Should I lyophilize my protein, or keep it in solution?
Lyophilization allows for more stable long-term storage; however, the protein must be reconstituted before use. There are also specific considerations that need to be taken for handling lyophilized peptides and proteins.
Protein storage in solution is more prone to microbial or proteolytic degradation.
At what temperature should I store my protein?
Storage of protein solutions at room temperature leads to protein degradation and/or inactivity, also commonly as a result of microbial growth.
Repeated freeze-thaw cycles should be avoided, which can also decrease protein stability.
How should I reconstitute / dissolve my protein?
Concentration considerations
Reconstitution concentration is important for protein stability.
Solutions at concentrations lower than 1 mg/mL are more prone to proteolysis or inactivation because of low-level binding to the storage vessel.
Because it may not be realistic in some cases to have a higher concentration than 1 mg/mL, it is common practice to add “carrier” , such as purified bovine serum albumin (BSA), to 1 to 5 mg/mL (0.1% to 0.5%).
Reconstitution process
Proteins must be dissolved in buffers with great care. Vigorous shaking or stirring (e.g., with a vortex) can destroy biological activity. The use of gloves is necessary in order to prevent contamination from proteases which may degrade the protein sample.
You should also make sure dissolve it in an appropriate buffer: acidic peptides should be stored in a basic buffer, and basic peptides in acidic buffer. If necessary, sonicate briefly.
Peptides containing Trp, Met or Cys require special care to avoid oxidation. Oxygen-free water or reducing agents may be used.
For storage, peptide solutions should be aliquoted and kept frozen at -20°C. Most peptides containing Trp, Met, Cys, Asn or Gln have limited shelf life. Long-term storage is not recommended.
Further agents to promote protein stability
Some of the additives below may help to enhance the shelf life of the proteins. However, the question of whether to add or not should be carefully considered depending upon the experimental need.
For example, high viscosity may compromise sample quality as well as downstream experimental results. While helping to prevent disulfide bond formation, reducing agents also inhibit other redox reactions which may be of interest. Similarly, the inclusion of protease inhibitors for proteins to be used with cell cultures or in living systems would not be advisable.
Cryoprotectants
Adding 25-50% glycerol or ethylene glycol can help to stabilize proteins by preventing the formation of ice crystals at -20 °C, that can destroy protein structure, enabling repeated use from a single stock.
Protease inhibitors
Protease inhibitors interact with the active site of proteases that hamper proteolytic activity detrimental to protein stock stability. Some examples are: PMSF (0.1-1 mM), Pepstatin A (1 μg/mL), Leupeptin (1 μg/mL), etc.
Phosphatase inhibitors
Phosphatase inhibitors inhibit several phosphatases to preserve the phosphorylation state of the proteins.
If you don't add phophatase inhibitors, this can result in reduced or no kinase activity or unexpected protein size.
Anti-microbial agents
Adding antimicrobial agents—for example, 1.02-0.05% (w/v) sodium azide (NaN3) or 0.01% (w/v) thimerosal—can help to prevent microbial growth.
Reducing agents
Most proteins contain free thiol groups containing cysteines and oxidation of these free thiols leads to the formation of a disulfide bond between cysteines. The majority of the intracellular proteins require these free thiols for their biological function.
Adding reducing 1-5mM dithiothreitol (DTT), and 2-mercaptoethanol (2-ME, sometimes called ß-ME), can help to maintain proteins in a reduced state by preventing oxidation of cysteines.
Please note that the presence of reducing agents can interfere with certain reactions. So we recommend removing reducing agents if you intend to conjugate the protein. Since reducing agents prevent disulfide bond formation, this is particularly pertinent if you intend to label the protein via a thiol group. In addition, some protein structures are maintained by intramolecular disulfide bonds, which might be broken in a reducing environment.
Chelating agents
Adding chelating agents, like 1-5mM EDTA, groups proteins together, and helps to maintain the reduced state.
Detergents
Adding detergents such as 0.01% Tween-80 help maintain the stability of the hydrophobic protein in aqueous solution. This also reduces the probability of proteins binding to the storage tube.
출처: https://www.abcam.com/help/protein-stability-tips-and-tricks